Needed material: - Pair of Boots in Leather - Acrylic Color Spray - White Silk Ribbon -Yellow shoeslaces - Eyelets
EXSAMPLE PIC:
Procedure For the shoes use a pair of boots in leather, cut the upper part vertically to triangle. Then glue another piece of leather under the triangle, so the triangle stay open. Then take some acrylic color (blue and white) and paint the boots, to avoid that the colors mixing you can use paper tape to divide the parts. First you give the blue and then the white. Now you put the eyelets on the back of the boots, and then you put in the eyelet the yellow shoelaces. Now you take some silk white ribbon and with glue you make the decoration on the border of the boots. This is probably the easiest method.
- A pair of gloves in leather color bordeaux or dark brown in alternative leather in these color.
Procedure:
My advice is to buy a pair of gloves in leather color bordeaux (is better) or dark brown, then to cut the finger in the middle. Now with a cotton thread of the right color sew and stop the stitchs cut, so the gloves won't break.
In alternative if you don't find a gloves you can do them with leather, you take the model of another pairs of gloves.
I advice you to don't use the faux leather, because will make sweat the hands, and is more likely that it break with the hot.
Cut the shapes similar to that you see in the image n.1 on the cloth and sew it. You must make a little bag, so you take the right sizes on you body.
Now cut in the cloth also a little loop, where then you will insert the belt. Remember to sew it not in the center of the bag, but more in height size, anyway you can see it in image n.2 . Now put the eyelets on the opening and then over this sew the orange laces then in second moment you will insert in the eyelets's hole, so the bag will rest close.
For the belt you make it always in same cloth of the bag, remember to sew it in doulble layer, so it will be more resistent. Now insert in it the press stud (you can insert it like closing or like decoration, check it in official Rikku's image). Then when the belt will be ready, put in it also the buckle, I know that this type of buckle is dirricult to find, so you can costumize it.
Take a similar buckle without steel bar in the middle and make it with a steel lamination or in other metals, that you can find in hardware store and attach it with strong glue (loctite) or fuse it with oxyhydrogen flame.
The last thing, to do stay the bags more swollen, you can insert inside them a piece of foam rubber.
- White or Cream color Cloth, can be Semi-transparent
Procedure:
See the model of the Sleeve in a official Rikku's image, cut it on the paper and bring it on the cloth (remember to do this with open model and not already close^^;;;)
Now sew the hem of the sleeve, but leave open it, you will close it with the ribbon.
Cut always in the cloth eight strips, these will became the strips for the ribbons. Now sew them in the border of the sleeve, in specular mode as you see in image n. 1.
For more security is better that you close the top side of the sleeve and insert in it a elastic strip, so the sleeve will rest on your arm without problem.
The Sleeves are ready, you must only tie the strip and to do the ribbons. (If you have some friend you wear the sleeves and ask at your friend to tie the ribbons, while if you are alone, tie the ribbons before you wear the sleeves
Needed material: - Yellow lycra - Orange lycra or silk strip - Orange laces - Eyelets - Bra's cups - Black leather belts - Two buckles
Procedure
Take two bra's cup with triangle shape. Cover them with yellow lycra (as you see in the first image)
Now take a strip of orange lycra or silk and sew it around the bra's cup covered with yellow lycra. (see the image)
Put two eyelets on every bra's cup over the attached orange strip; here you will put the orange laces, when you will link the two cups. (image n. 3)
Now sew a little yellow lycra strip at the two cups ( remember to do this in lycra, because it must be flexible, so also without fasteningr you can wear the bra, without break it or open it with orange laces.
Then sew a short black leather belt with a buckles at the hight side of the cup. (image n. 4) when you finished this, put in the buckles a long black leather belt, that will go from a cup to other cup. (you see this in the image).
So you finished all the Rikku's Bra.
Note: You can do it also without bra cups but I advice for the persons with big breast is better to use the cups.
