Cut the shapes similar to that you see in the image n.1 on the cloth and sew it. You must make a little bag, so you take the right sizes on you body.
Now cut in the cloth also a little loop, where then you will insert the belt. Remember to sew it not in the center of the bag, but more in height size, anyway you can see it in image n.2 . Now put the eyelets on the opening and then over this sew the orange laces then in second moment you will insert in the eyelets's hole, so the bag will rest close.
For the belt you make it always in same cloth of the bag, remember to sew it in doulble layer, so it will be more resistent. Now insert in it the press stud (you can insert it like closing or like decoration, check it in official Rikku's image). Then when the belt will be ready, put in it also the buckle, I know that this type of buckle is dirricult to find, so you can costumize it.
Take a similar buckle without steel bar in the middle and make it with a steel lamination or in other metals, that you can find in hardware store and attach it with strong glue (loctite) or fuse it with oxyhydrogen flame.
The last thing, to do stay the bags more swollen, you can insert inside them a piece of foam rubber.
- White or Cream color Cloth, can be Semi-transparent
Procedure:
See the model of the Sleeve in a official Rikku's image, cut it on the paper and bring it on the cloth (remember to do this with open model and not already close^^;;;)
Now sew the hem of the sleeve, but leave open it, you will close it with the ribbon.
Cut always in the cloth eight strips, these will became the strips for the ribbons. Now sew them in the border of the sleeve, in specular mode as you see in image n. 1.
For more security is better that you close the top side of the sleeve and insert in it a elastic strip, so the sleeve will rest on your arm without problem.
The Sleeves are ready, you must only tie the strip and to do the ribbons. (If you have some friend you wear the sleeves and ask at your friend to tie the ribbons, while if you are alone, tie the ribbons before you wear the sleeves
Needed material: - Yellow lycra - Orange lycra or silk strip - Orange laces - Eyelets - Bra's cups - Black leather belts - Two buckles
Procedure
Take two bra's cup with triangle shape. Cover them with yellow lycra (as you see in the first image)
Now take a strip of orange lycra or silk and sew it around the bra's cup covered with yellow lycra. (see the image)
Put two eyelets on every bra's cup over the attached orange strip; here you will put the orange laces, when you will link the two cups. (image n. 3)
Now sew a little yellow lycra strip at the two cups ( remember to do this in lycra, because it must be flexible, so also without fasteningr you can wear the bra, without break it or open it with orange laces.
Then sew a short black leather belt with a buckles at the hight side of the cup. (image n. 4) when you finished this, put in the buckles a long black leather belt, that will go from a cup to other cup. (you see this in the image).
So you finished all the Rikku's Bra.
Note: You can do it also without bra cups but I advice for the persons with big breast is better to use the cups.
- Two Yellow/orange Feathers (canary feathers are the best) - Orange Acrylic Color for Airbrush - An Airbrush - Hooks for Hearings
Procedure:
If you can find a pair of earring with yellow/orange feather is best, then you can costumize them.
Anyway you can take the feather or the earrings with feathers, and with a airbrush with orange color soften it.
If you have alread the earrings, you finished them...but if you have only the feather now make this.
Put the hooks (remember to buy only piece don't only the hook but also the join for it) at the feather, and them are ready. (remember to don't buy only the hook but also the join for it)
About the hooks to buy a long hooks, because the earrings of Rikku are with a long hook. (Check in official Rikku's image)
- Long Blonde Wig - Blue and Pink/red beads of various dimensions. - Trasparent Rubber Bands for hair - Black Rubber Bands for hair
Procedure:
Take a normal long blonde wig or if your styling your own hair follow same steps.
Don't worry if your wig isn't a perfect, without longer hair or right fringe, in this tutorial it'll teach you how adjust it.
Tie the hair in ponytail with a black rubber band, but leave two hair locks in front and behind, as you see in the pictures.
Now do four little pigtails at these locks and tie them with trasparent rubber band and put in them the beads (see picture below) Here you must use two types of beads, two big (blue and pink or red) and two really small. (for the right color check on the official Rikku's image).
Take in the pony tail some locks, and do also at these little pigtails and close them always with trasparent rubber band as in the (picture below)(check the number of pigtalis on official Rikkus' image)
Now insert a medium beads in the middle of the pigtails, then insert the bottom side of the pigtails in the black rubber band, as you see in the picture below, while you insert the pigtails you must cross they between them.
Now if you see that your ponytail isn't long enough, buy a hair blonde extension (you can do it also with another wig, cut the hair and sew it on the cloth strip) and insert this appilication inside at the black rubber band, so you will have a longer ponytail. (see the image below)
If the fringe is too short, take or make an extension and sew it at the wig with a normal needle (you must sew it by hand, because with sewing machine it's impossible to do and the result won't be good). Image below.
Now put the wig on you head, and insert the hair band, and put on it the two free pigtails on it, as you see in the image below
